As you know Engineering plastic drag chain The awareness of and steel drag chain is increasing, and the scope of use is also increasing. Some ultra long and overweight drag chains are gradually assembled into production, then a more common problem arises. How to ensure the safety requirements of machine tool drag chain in the above circumstances, then the drag chain guide groove is presented, so that the drag chain can be limited to a certain range of movement, and the safety needs have been met. What precautions should be taken during the installation of the guide groove?

If the plastic cable drag chain is longer in use and exceeds the maximum support length, in order to safety and protect the drag chain, the guide channel or bracket should be used. The steel aluminum drag chain and the plastic drag chain are both used to pull and protect the cables, oil pipes and gas pipes on the mechanical equipment. Their protection greatly increases the safety and service life of the internally protected things, And improve the efficiency of work; In addition, the reasonable classification of cables will not be scattered, which will not look so disorderly and increase the aesthetic feeling of the mechanical equipment itself.

The first thing to notice is that the material is engineering plastic drag chain or steel drag chain according to the working environment, and then bridge drag chain or fully enclosed drag chain. Secondly, before using the drag chain, pay attention to the selection of the model of the drag chain, that is, the selection of the inner height, inner width and bending radius. In order to keep stability, try to leave enough space. The three are generally about 10% richer. This can reduce the strong tension of cables, oil pipes and other built-in objects on the plastic drag chain, and reduce the friction caused by the relative movement between textiles, So as to achieve better protection of the cable.