How to connect the bamboo cooling pipe
1、 Introduction to Slub Cooling Pipe
Bamboo cooling pipe is a new type of heat dissipation equipment. Because of its excellent heat dissipation effect, low energy consumption, low noise and other characteristics, it is more and more popular. The main material of the slub cooling pipe is the slub, which is filled with heat-conducting liquid inside and transmits heat to the outside of the pipe through the pipe to achieve the purpose of heat dissipation.
2、 Connection mode of bamboo cooling pipe
There are two main connection modes of bamboo cooling pipe, one is direct welding connection, the other is pipe fitting connection.
1. Direct welding connection
Direct welding connection is to connect the bamboo cooling pipe with other pipes or equipment by welding. The connection mode has the advantages of tight connection, no air leakage and high connection strength. However, welding requires the use of professional welding equipment and skills, which is difficult to operate and requires attention to safety.
2. Pipe fitting connection
Pipe fitting connection is to connect two or more bamboo cooling pipes together through pipe fittings. Common pipe fitting connection methods include elbow, tee, cross, etc. The connection mode has the advantages of flexible connection, easy disassembly, simple operation, etc. At the same time, the connection of pipe fittings also has shortcomings such as insecure connection and easy air leakage. Attention should be paid to the selection of connection methods and connection materials.
3、 Precautions for connection of bamboo cooling pipe
Whether direct welding or pipe fitting connection is adopted, the following matters shall be noted:
1. Before connection, the pipeline needs to be cleaned to ensure that the impurities, rust and other substances inside the pipeline are removed;
2. Ensure tight connection and avoid air leakage;
3. Pay attention to the selection of connection mode and connection materials to ensure the firmness and stability of the connection;
4. Testing shall be carried out after connection to ensure that there is no leakage or leakage;
5. If it is necessary to disassemble or replace the connection part, it is necessary to release the pressure inside the system first to avoid safety accidents caused by excessive pressure.
4、 Conclusion
Bamboo cooling pipe is an excellent heat dissipation equipment. Correct connection mode and precautions can ensure its normal operation and service life. No matter which connection mode is used, attention should be paid to the quality and safety of the connection. It is hoped that this paper can be helpful to the connection of bamboo cooling pipe.
