With the gradual improvement of industrial equipment, the application of plastic silent drag chain has gradually become common. Plastic silent drag chains can be found on electronic products, woodworking machinery, glass machinery plants, lifting and conveying equipment, automated warehouses, window and door machinery, plastic machines, mechanical arms, CNC lathes and other industrial equipment. The plastic silent drag chain has become a reasonable safety device for cable safety protection.

How to choose the most suitable plastic silent drag chain for the cable has also become the core problem that users care about. How to choose a suitable plastic silent drag chain? Next, I will briefly introduce the specifications and models of the plastic silent drag chain and the matters that should be paid special attention to in its installation and application. I look forward to providing some assistance to many consumers.

Selection of plastic silent drag chain:

Inner height: select the thickest of embedded cables, oil pipes, bronchi, water pipes, etc. as the reference height, and add at least 10% of the height of the indoor space as the inner height of the plastic silent drag chain. If the superposition is based on the specific height after overlapping, it is the reference height.

Inner width: select some thicker cables, oil pipes, bronchi, water pipes, etc., the sum of their diameters as the reference for the inner width of the plastic silent drag chain, and reserve at least 10% of the total width of the indoor space.

Bending radius: the highest bending radius of the embedded cable, oil pipe, bronchial tube, water pipe, etc. shall be selected as the standard value, and the indoor space above 10% shall be reserved. The placement standard of plastic silent drag chain embedded cable, oil pipe, water pipe, bronchial tube, etc.

15% extra indoor space shall be reserved to allow the embedded cable, oil pipe, etc. to move freely, so as not to form tensile resistance to the plastic silent drag chain in the semi longitudinal direction.

The transmission lines with large diameter difference shall be separately paved, and the net weight shall be evenly distributed. If necessary, spacers can be used for separation.

During fast or high-frequency operation, the transmission lines should be separated from each other as far as possible in terms of capacity, instead of being juxtaposed with each other. It is suggested to use spacers when there are many cables, bronchi, oil pipes, etc.

Installation of plastic silent drag chain:

Use a proper flat head screwdriver to vertically insert into the opening holes on both sides of the rear cover plate, open the rear cover plate, put the cables, oil pipes, etc. into the drag chain according to the placement standards brought by everyone, and then cover the rear cover plate tightly. In addition, the fixed end of the cable and the theme movable end should be fixed in many ways by the support equipment.