1、 Plastic Nylon drag chain characteristic:

1. Each section of the plastic nylon drag chain can be opened for easy installation and maintenance. It has low noise and wear resistance when moving, and can move at high speed.

2. The plastic nylon drag chain is suitable for reciprocating movement, and can pull and protect the built-in cable, oil pipe, air pipe, water pipe, etc.

2、 Structure of plastic nylon drag chain:

1. The shape of the plastic nylon drag chain is similar to the tank chain. It is composed of many unit links, which can rotate freely.

2. The unit chain link of the plastic nylon drag chain is composed of left and right chain plates and upper and lower cover plates. Each link of the plastic drag chain can be opened, which is easy to assemble and disassemble without threading. After the cover plate is opened, the cable, oil pipe, gas pipe, water pipe, etc. can be put into the drag chain.

3. The inner height, outer height and pitch of the same series of plastic nylon drag chains are the same. More convenient is that the inner width and bending radius R of the drag chain can be selected differently.

4. In addition, the plastic nylon drag chain may be provided with a separator to separate the space in the chain as required.

3、 Basic parameters of plastic drag chain:

(1) The plastic nylon drag chain is made of reinforced nylon, which has high pressure and tensile load, good toughness, high elasticity and abrasion resistance, flame retardant, stable performance at high and low temperatures, and can be used outdoors.

(2) Resistance: resistant to oil and salt, with certain acid and alkali resistance.

(3) Operating speed and acceleration: the maximum speed can reach 5 m/s, and the maximum acceleration can reach 5 m/s (the specific speed and acceleration depend on the operating conditions).

(4) Operation life: under normal overhead use, it can reach 5 million reciprocating times (specific life depends on idle operation).

4、 Plastic nylon drag chain materials and properties:

(1) Material: imported engineering plastics, reinforced nylon, with high pressure and tensile load, good toughness, high elasticity and wear resistance, flame retardant, stable performance at high and low temperatures, can be used outdoors.

(2) Resistance: oil resistance, salt resistance, abrasion resistance, impact resistance, high strength, suitable for rapid movement, and certain acid and alkali resistance. Firm structure, no deformation, durable, high load, all-weather [- 40 ° to 100 °] corrosion, impact, radiation, vacuum environment.

(3) Convenience: light weight, composed of sections, self adjustable length, convenient disassembly and assembly, various kinds of bending radii, free suspension length of 1-2m, height of 25-75mm, this product has the characteristics of large capacity of carrying: wires, cables, pipes, etc. in the same specifications, which is unmatched by any other protective device for wires and pipes.